Models > YKGRT607HT5

YKGRT607HT5 KitchenAid Range - Overview

Get Parts and Repair Help for YKGRT607HT5

If you know the range repair part you need, you can browse the list of all parts on the YKGRT607HT5, or you can search by name or part description. You can also find your part by where it is located on the YKGRT607HT5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKGRT607HT5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$41.39

Inner Door Glass

$4.46

Screw

This screw is sold individually.

$5.25

Touch-Up Paint - White

$18.07

2 Piece Broiler Pan

$4.46

Light Gasket

$6.34

Bumper Pad Set of 4

***NOTE: This part has been substituted by the manufacturer and may not appear the same as the original but should function the same. These pads go on the bottom of your gas cook...

$23.87

Light Lens

$54.04

Door Hinge - Left or Right Side

$5.69

Touch-Up Paint - 1/2oz. - Biscuit

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inside door glass broke

  • Customer: MANNY from LIVERMORE CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 56 of 64 people found this instruction helpful
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installi... read more

Oven wouldn't light

  • Customer: james from downers grove IL
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 33 of 50 people found this instruction helpful
My analysis was flawed. The $100 gas valve was acting erraticaly, so I replaced it. On a hunch, I took the top front off the stove and immediately saw a row of mini relays mounted on the $300 control board. The one labeled "bake" was black!
It is just too small for years of gas on / gas off high current. (The gas valve is indestructable. I took the ol... read more

Oven stopped working/Slow to ignite

  • Customer: John from Chicago IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench set
  • 25 of 27 people found this instruction helpful
Although the ignitors glowed brilliant yellow I learned from an expert there are 2 fail modes. 1. that they break and don't glow well enough to ignite the gas or 2. they get resistive over the years and do not pass enough current to open the valve. This is important to know because the current passes through the ignitor before it gets to the valve. If the... read more