Models > YKESS908SS05

YKESS908SS05 KitchenAid Range - Overview

Get Parts and Repair Help for YKESS908SS05

If you know the range repair part you need, you can browse the list of all parts on the YKESS908SS05, or you can search by name or part description. You can also find your part by where it is located on the YKESS908SS05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKESS908SS05 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$36.04

Oven Rack

Sold individually.

$2.70

Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$3.83

SCREW

$24.55

Light Bulb - 120-130V - 15W

Sold individually.

$47.08

Thermostat

Also known as Thermal cut-off (fuse). This part establishes and maintains the internal temperature of the oven cavity.

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$73.11

Broil Element

This broil element is found on the roof of the oven.

$53.77

Temperature Probe

Also known as a meat probe.

$2.70

Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Self Cleaning blows the thermostat fuse

  • Customer: Joseph from Worthington PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 57 of 61 people found this instruction helpful
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Dis... read more

Power shut down and door lock-up after self-cleaning

  • Customer: john from new market MD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 23 of 25 people found this instruction helpful
My wife used the self cleaning function for the first time after 1.5 years of owning, of course out of warranty. A quick google search identified the problem. Called Kitchenaid, they said of course it can't be that simple, they had never heard of this problem, need to schedule a service call. Googled and found this site, Ordered the part, came in, only took... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 26 of 52 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more