Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
March 3, 2018
I connected a digital electric meter to my old part as well as the new part and am unable to see any current on either part. All test have show voltage as well as part #9 (partselect number ps11741729) can you confirm that the part i received #15 (partselect number ps11747263) will allow voltage, and that the new part i received was bad
Hello Alex, Thank you for your inquiry. A working thermostat tested at room temperature should have a reading of close to 0 ohms on a multimeter. I have also included our link for another type of test for the thermostat. Hope this helps!
https://www.partselect.com/Range-Stove-Oven+Oven-Thermostat-Testing+repair.htm
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ted
September 20, 2017
I have a Whirlpool oven, gy396lxgq4, and I have low voltage going to my over heating element...only 49.6 volts. The broiler element is fine and receives 220 volts. What part could cause that?
For model number GY396LXGQ4
Hi Ted,Thank you for the question. When you have an over heating element it is recommended you replace the Temperature Sensor,PartSelect Number PS11744825.Hope this helps!
Was this helpful?
Thank you for voting!
James
April 10, 2019
At what temp should this thermoswitch show continuity?
For model number 9751984
Hi James,
Thank you for your question. It should read closed for continuity. Here is a link to one of our videos from YouTube that you may reference on how to use a multimeter, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
James
December 3, 2019
When baking, oven doesnt always hold temp. Replaced burner/igniter unit and problem still exists.
For model number KGSA906PSS00
Hello James and thanks for writing.
It sounds like a faulty temperature sensor PS11748765 check and replace if needed. We hope this helps. Please contact us anytime.
I just purchased and received PS11747263 (Thermostat) but I'm not getting any continuity when testing. Should I be getting a reading of close to 0 ohms ?
For model number Whirlpool Gold gas oven - gw395legb6
Hello Brad, thank you for contacting us. A working thermostat, part number PS11747263, tested at room temperature should have a reading of close to 0 ohms on a multimeter. If this is not the case, you may need to replace it. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
