Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YKERS507HB3

YKERS507HB3 KitchenAid Range - Overview

Get Parts and Repair Help for YKERS507HB3

If you know the range repair part you need, you can browse the list of all parts on the YKERS507HB3, or you can search by name or part description. You can also find your part by where it is located on the YKERS507HB3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKERS507HB3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$52.58

Inner Door Glass

This inner door glass is used in ranges. It creates a transparent heat barrier inside your oven door. For this installment, the only tool needed is a #2 Phillips screwdriver. To repair, first remove the oven door from the range by lifting and pulling from the bottom of the hinges. To dissemble the door, you will need to remove the screws on the outer edge and remove the side pieces. There are also screws towards the middle that need to be removed to pull out the bottom trim. Next, lay the door on its back and slide outer door glass off and remove top trim. For the rest of the installation instructions refer to the manual provided by the manufacturer. Pro tip: remember to wait until the surface is cool before starting this repair project.

$9.03

8" Drip Bowl - Black

This black porcelain drip bowl with a hole in the bottom is intended for use with some electric ranges and cooktops. This drip bowl measures 10 inches in diameter at its widest poi...

$4.07

Screw

This screw is sold individually.

$23.17

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

$8.11

Drip Bowl - 6" - Black

Sold individually.

$32.78

Light Socket

The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socke...

$4.63

Light Gasket

This part creates a seal around the light lens and bulb.

$5.81

CLEANER

This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and ...

$13.31

Surface Burner Knob

This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is the replacement part you will need. This knob accepts a d-shaped shaft. To successfully install this part, line the flat edge of the shaft on the switch up with the hole in the knob, then simply press the knob onto the shaft and into place. This part is sold individually, and is made of black plastic. This part is approximately 2 inches in diameter.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hidden bake element burned out.

  • Customer: Robert from Powell, OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 167 of 190 people found this instruction helpful
This heating element is accessed from the right side of the range. The parts drawings are misleading, making you think that it can be accessed from below -- not so!

Remove the right side panel from the range by removing screws on back edge, and bottom center on the inside. Slide the panel forward to release from tabs on the front edge, then pull o... read more

Oven not heating

  • Customer: Neil from Flemington, NJ
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 119 of 140 people found this instruction helpful
Before you begin,some notes:

1. The wiring diagram on the rear of the oven incorrectly shows a bi-metal element in the L2 side of the oven heating element circuit. There is no bi-metal element in the circuit.
2. There is a fast blow 20 Amp fuse with radial leads in the L2 side of the oven heating element circuit which is NOT shown on the oven... read more

Inside door glass broke

  • Customer: MANNY from LIVERMORE, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 109 of 120 people found this instruction helpful
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installi... read more