Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YKERS205TW3

YKERS205TW3 KitchenAid Range - Overview

Get Parts and Repair Help for YKERS205TW3

If you know the range repair part you need, you can browse the list of all parts on the YKERS205TW3, or you can search by name or part description. You can also find your part by where it is located on the YKERS205TW3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKERS205TW3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$29.46

Long Oven Sensor

This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.

$84.13

Surface Element with Limiter - 6" - 1200W

Sold individually.

$66.33

Inner Door Glass Pane

Glass only.

$41.05

Door Hinge - Left or Right Side

This door hinge can be used for the left or right side. As per the manufacture if the hinges have never been replaced,on the appliance,they suggest to replace the door hinge recept...

$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$7.22

Touch-Up Paint - .6fl Ounce - Biscuit

$5.15

Insulation

This strip of insulation is located within the oven door.

$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Right rear burner went bad

  • Customer: Mark from Loxahatchee, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 105 of 113 people found this instruction helpful
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip char... read more

Oven not holding 350 F, when cooling the coils did not reheat

  • Customer: David from Westford, MA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 105 of 121 people found this instruction helpful
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. ... read more

Oven wouldn't get hot enough

  • Customer: Shawn from Atlantic Highlands, NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 82 of 90 people found this instruction helpful
First and MOST IMPORTANTLY, I located the breaker switch for my oven and turned it off. I verified this by noticing that the electric clock on the oven display was no longer powered.

After removing all the oven racks, I removed the two screws at the bottom of the back end of the oven holding the metal "floor" in place.

Removing the... read more