Models > YKERS205TS5

YKERS205TS5 KitchenAid Range - Overview

Get Parts and Repair Help for YKERS205TS5

If you know the range repair part you need, you can browse the list of all parts on the YKERS205TS5, or you can search by name or part description. You can also find your part by where it is located on the YKERS205TS5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKERS205TS5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$3.76

Levelling Leg

This leg is sold individually.

$2.70

Screw

This screw is sold individually.

$59.44

Bake Element - 3600W

This bake element is found on the bottom of the oven.

$43.62

Oven Rack

Sold individually.

$22.43

Knob - Stainless

Sold individually.

$5.54

Touch-Up Paint - White

$3.83

SCREW

$66.29

Sensor

This temperature sensor detects the temperature within the oven cavity.

$28.95

Door Hinge - Left or Right Side

This door hinge can be used for the left or right side. As per the manufacture if the hinges have never been replaced,on the appliance,they suggest to replace the door hinge receptacle kit.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't get hot enough

  • Customer: Shawn from Atlantic Highlands NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 54 of 59 people found this instruction helpful
First and MOST IMPORTANTLY, I located the breaker switch for my oven and turned it off. I verified this by noticing that the electric clock on the oven display was no longer powered.

After removing all the oven racks, I removed the two screws at the bottom of the back end of the oven holding the metal "floor" in place.

Removing the... read more

Oven Door Inner Glass Broken

  • Customer: Shariq from West Conshohocken PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 21 of 22 people found this instruction helpful
This is fairly easy for anyone to do. First I opened up the front (silver part) of the oven door by removing the screws at the top and the bottom. Then I kept on removing the various layers of glass... the 2 outside ones are removed by removing their respective screws and then you get to the inner-most. These 2 inner ones are in a frame that holds them t... read more

Oven would not heat up past 225 degrees

  • Customer: Steve from Merrimack NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 17 people found this instruction helpful
Unplug the oven.

While you are back there, open the small access panel in the back, bottom center, by remoing one phillips head screw.

You'll see where the power cord is tied into the appliance, and above that there are two connectors attached to the two contacts on the element. These slide off. (Make sure the oven is unplugged or y... read more