Models > YKERC607HS5

YKERC607HS5 KitchenAid Range - Overview

Get Parts and Repair Help for YKERC607HS5

If you know the range repair part you need, you can browse the list of all parts on the YKERC607HS5, or you can search by name or part description. You can also find your part by where it is located on the YKERC607HS5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for YKERC607HS5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 4 hrs and your part ships today!
$48.38

Inner Door Glass

Order within the next 4 hrs and your part ships today!
$28.25

Temperature Sensor

This temperature sensor is used with self cleaning ovens. Its 1000 ohm resistance increases with temperature. This sensor has male leads and comes with ceramic wire nuts.

Order within the next 4 hrs and your part ships today!
$101.13

Dual Element with Limiter - 2500/1200W

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

Order within the next 4 hrs and your part ships today!
$5.48

Light Gasket

Order within the next 4 hrs and your part ships today!
$18.07

2 Piece Broiler Pan

The top of this part is now black.

Order within the next 4 hrs and your part ships today!
$5.05

Touch-Up Paint - White

Order within the next 4 hrs and your part ships today!
$4.54

Screw

This screw is sold individually.

Order within the next 4 hrs and your part ships today!
$12.78

Surface Burner Knob

Sold individually.

Order within the next 4 hrs and your part ships today!
$61.80

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

F3 Error message

  • Customer: Charles from Brecksville OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 98 of 124 people found this instruction helpful
Two screws remove the front of the sensor (put a pan under the sensor to catch the screws), One nut removes the rear cover to access the rear of the sensor. Separating the two halves of wiring harness takes a little dexterity. BIG TIP! Tie a string to the back of the sensor wire and pull the sensor out from the front making sure the string still shows thru t... read more

Hidden bake element burned out.

  • Customer: Robert from Powell OH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 90 of 104 people found this instruction helpful
This heating element is accessed from the right side of the range. The parts drawings are misleading, making you think that it can be accessed from below -- not so!

Remove the right side panel from the range by removing screws on back edge, and bottom center on the inside. Slide the panel forward to release from tabs on the front edge, then pull o... read more

Inside door glass broke

  • Customer: MANNY from LIVERMORE CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 64 of 72 people found this instruction helpful
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installi... read more