Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YKEHV309PS01

YKEHV309PS01 KitchenAid Wall Oven - Overview

Get Parts and Repair Help for YKEHV309PS01

If you know the wall oven repair part you need, you can browse the list of all parts on the YKEHV309PS01, or you can search by name or part description. You can also find your part by where it is located on the YKEHV309PS01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for YKEHV309PS01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$60.28

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$6.92

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

$51.62

Turntable Motor

This motor is used to rotate the cooking tray.

$6.80

Touch-up Paint - Black

16ml

$4.94

SCREW

Sold individually.

$44.70

RACK-OVEN

$37.62

Convection Rack - Short

$7.11

Hinge Pin Kit

Includes 4 hinge pins. Used at hinges to hold door open so the door can be lifted off.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 129 of 162 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 82 of 90 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more

Broken spring in microwave door

  • Customer: Mark from Naperville, IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 43 of 52 people found this instruction helpful
All screws easily accessible except for one on bottom of door. It was tough to remove, even tougher to reinstall. Took some time and a unique combination of patience and small tools.

My biggest problem was getting parts. I ordered what was shown in the exploded view - a spring. I received one spring. When I took the door apart I found 2 sprin... read more