Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YKEHV309PM01

YKEHV309PM01 KitchenAid Wall Oven - Overview

Get Parts and Repair Help for YKEHV309PM01

If you know the wall oven repair part you need, you can browse the list of all parts on the YKEHV309PM01, or you can search by name or part description. You can also find your part by where it is located on the YKEHV309PM01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for YKEHV309PM01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$55.86

Inner Door Glass

This inner door glass is a heat resistant part that fits into a stove, oven, wall oven, cooktop, or range as the inner glass panel of the appliance door. The glass panel allows you...

$59.34

Glass Cooking Tray

This cooking tray is a common microwave component, and may also be known as a turntable tray. The piece is colorless and is made of glass. The outer diameter is 16 inches. The function of the turntable is to rotate inside your microwave when the door has been closed and the timer has been activated. This will ensure a stable and more even cooking temperature. The most common reason for needing to replace this part is if your old model has been cracked or damaged. Small chips over time will spider and expand into larger cracks. For this installation, no tools are required.

$44.34

Oven Rack

This oven rack is chrome in color and is approximately 24 inches wide by 16 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers h...

$25.98

Halogen Light Bulb - 5W 12V

This broil element, located at the roof of the oven, has push on terminals. The element supplies heat to the oven. If there is little to no heat when broiling and baking, or the element does not heat, replacing the broil element can be a solution. This part is around 12 inches wide and 19 inches long. To replace it, pull the oven door from hinges after removing screws. Next, remove the screws holding the elements in place and pull off wires attached to the back of the element. To finish off, add new element and screw it back in place. Remember to unplug the oven from the power source before beginning this installation.

$39.09

Limit Thermostat

An oven thermostat is a switch that opens and closes in response to the temperature it senses. It is typically found in the control panel, where a liquid-filled temperature-sensing...

$66.80

Temperature Sensor

The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straight away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.

$34.64

Torsion Spring - Right Side

This is to be used with Stainless Steel models.

$20.63

Baseless Lamp

This is a small light bulb.

$6.36

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$41.44

Torsion Spring - Left Side

This is to be used with Stainless Steel models.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 159 of 198 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 97 of 106 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more

Broken spring in microwave door

  • Customer: Mark from Naperville, IL
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 48 of 57 people found this instruction helpful
All screws easily accessible except for one on bottom of door. It was tough to remove, even tougher to reinstall. Took some time and a unique combination of patience and small tools.

My biggest problem was getting parts. I ordered what was shown in the exploded view - a spring. I received one spring. When I took the door apart I found 2 sprin... read more