Models > YKEHC309JS5

YKEHC309JS5 KitchenAid Oven / Microwave Combo - Overview

Get Parts and Repair Help for YKEHC309JS5

If you know the oven / microwave combo repair part you need, you can browse the list of all parts on the YKEHC309JS5, or you can search by name or part description. You can also find your part by where it is located on the YKEHC309JS5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven / microwave combo. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$46.96

Inner Door Glass

$36.04

Oven Rack

Sold individually.

$57.61

Glass Cooking Tray

$2.70

Screw

This screw is sold individually.

$22.68

Halogen Light Bulb - 5W 12V

Sold individually.

$5.25

Touch-Up Paint - White

$37.04

Thermal Overload Safety Thermostat

This part establishes and maintains the internal temperature of the oven cavity.

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$53.77

Temperature Probe

Also known as a meat probe.

$30.04

Torsion Spring - Left Side

This is to be used with Stainless Steel models.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 67 of 90 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

Front glass broke on the oven door

  • Customer: Ian from Shoreview MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 45 of 45 people found this instruction helpful
The glass broke after I took the oven door off to tighten the handle which had become lose.....There are 4 screws and one of th 4 had come out , hence the lose handle....So I tightened the 4 screws which were in a metal bracket only to find out under all the foil wrap was glass, and by tightning the screws they fractured the glass into a million little shard... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 45 of 51 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more