Models > YKDRP467RS00

YKDRP467RS00 KitchenAid Range - Overview

Get Parts and Repair Help for YKDRP467RS00

If you know the range repair part you need, you can browse the list of all parts on the YKDRP467RS00, or you can search by name or part description. You can also find your part by where it is located on the YKDRP467RS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$46.96

Inner Door Glass

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$2.70

Screw

This screw is sold individually.

$22.68

Halogen Light Bulb - 5W 12V

Sold individually.

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$2.70

Screw

This screw is sold individually.

$2.70

SCREW

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$2.70

Ground Screw

Sold Individually.

$26.78

Burner Cap - 6000 BTU

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 67 of 90 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

Cracked the inner door glass by wiping with wet rag when hot

  • Customer: James from Renton WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 25 of 30 people found this instruction helpful
Removed the oven door by following the straightforward instructions in the user's manual. Removed philips head screws to take the door assembly apart. Removed clips holding the two inner door glass plates, and the two plates. Removed the clamp holding the broken glass plate, then the glass and associated glass fragments. Then cleaned and re-installed the... read more

Microwave light-bulb went out

  • Customer: Eric from Camas WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 21 of 28 people found this instruction helpful
First, I removed the grill from the top of the microwave by removing 3 screws and then by sliding it out. It was a bit tricky, but you have to rotate it under so the grill comes out from behind the display.
Next, I removed the bottom grill by removing 4 screws. This one removed easily. Then, I removed 2 more screws that were under the bottom grill an... read more