Models > YKCMS1555SS0

YKCMS1555SS0 KitchenAid Microwave - Overview

Get Parts and Repair Help for YKCMS1555SS0

If you know the microwave repair part you need, you can browse the list of all parts on the YKCMS1555SS0, or you can search by name or part description. You can also find your part by where it is located on the YKCMS1555SS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.




Door Latch Bracket

Replace this part if the microwave door won't open.


Cooking Tray


Circular Turntable Support with Wheels


Door Interlock Switch Kit

This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.


Shaft, Turntable




USE WPL 815174



This part is used to generate microwave energy/heat.



Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

microwave door stuck....wont open

  • Customer: Sailendra from Round Rock TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 42 of 51 people found this instruction helpful
The reason the door would not open upon pressing the door opener is because the BRCKT-LATCH was broken. I discovered that after opening the microwave enclosing. The BRCKT-LATCH has two ends sticking out....each fits into a hole. One of the ends on the LATCH was broken and therefore it was not tightly fit. No upon pushing the door opener the LATCH would not f... read more

Microwave worked intermittently depending on how door was closed

  • Customer: Robert from Bainbridge Island WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 31 of 37 people found this instruction helpful
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to ... read more

loud buzzing noise

  • Customer: Sandra from coto de caza CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 58 people found this instruction helpful
The repair went well...I am so glad that I read this info before buying a new saved me lots of money. I did have a repair man come and look at it and he told me to buy a new one but it cost alot of money when it wasn't necessary. I did the repair and I was very proud of myself.
Three men watched a woman fix this and it was no problem...... read more