Models > YKBHC109JB0

YKBHC109JB0 KitchenAid Microwave - Overview

Get Parts and Repair Help for YKBHC109JB0

If you know the microwave repair part you need, you can browse the list of all parts on the YKBHC109JB0, or you can search by name or part description. You can also find your part by where it is located on the YKBHC109JB0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$62.32

Glass Cooking Tray

$35.99

Torsion Spring - Right Side

This is to be used with Stainless Steel models.

$19.90

Baseless Lamp

This is a small light bulb.

$3.86

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$43.41

Turntable Support Kit

$4.60

SCREW

$2.70

Hex Nut

10-32 hex - Sold Individually - Appliance originally takes 3 of this item.

$9.75

Spray Paint - 12 oz. - White

$2.70

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light out and Door spring broken

  • Customer: Lance from Angels Camp CA
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 26 of 41 people found this instruction helpful
Remove side deco strips to remove screws that hold to cabinet. Pull microwave out and set on saw horses (power cable should be long enough to do this). Remove screws to top cover and lift enough to remove all connectors from the front panel pcb. Remove grounding wires from next top lid. Remove connectors from transformer on rigt side and the two connectionss... read more

Microwave glass turntable when pop

  • Customer: Liza from Monterey CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 21 people found this instruction helpful
After popping the last few kernals of popcorn, we hear a different kind of pop sound come from our microwave oven. When we looking inside, we found that the glass turntable had broken unevenly in half. Although we didn't understand why it had happned, we did know we'd be without the use of the microwave without a new one. After less than 10 minutes surfin... read more

Tension spring replacement

  • Customer: Perry from Farmingdale NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
Here's a 21st century tip for all repairs: Get out your cell phone and take pictures of the steps as you go so you'll always have a reference if you forget something.

The replacement of the tension spring is easy. Getting there is the hard part. First, you need to remove the grill between the oven and microwave doors. There are 2 screw in the cent... read more