Models > YGH5184XPB2 > Instructions

YGH5184XPB2 Whirlpool Microwave - Instructions

All Instructions for the YGH5184XPB2
61 - 75 of 169
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Retaining clips on original grill were broken
With new replacement grill, a separate clip was supplied in the box that had to be screwed in to the top portion. This clip did not fit since the hole for the screw was on the right side and not the left, so I just snapped the grill in place with the existing clips.
There must be another clip that fits this unit but perhaps the person packing the box grabbed the wrong clip and taped it in with the shipped box.
Parts Used:
Vent Grille - Black
  • Angel from ESTERO, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave didn't have support ring when house was purchased.
Removed turntable
Place support ring in track
Place turntable on support ring.
Easy, peasy!
Parts Used:
RING-TURN
  • Leon C from MEDFORD, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burned out bulb
Husband replaced the bulb
Parts Used:
Light Bulb - 40W
  • Theresa from OVERLAND PARK, KS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced microwave filters
Replacement was easy as outlined in the microwave manual.
Parts Used:
Grease Filter Filter - Single
  • Brian from Washington, DC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
glass turn table cracked needed a new one
easy to replace, just the same as cleaning the turntable and placing back in the micorwave;
Parts Used:
Glass Cooking Tray
  • sharon from LAS VEGAS, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
grill broke
just snapped top in,
Service was excellent, could not get any better service.
Parts Used:
Stainless Steel Vent Grill and Clips
  • Patricia from Brick, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original vent grille clips broke off, so the grille would not stay on.
Just installed the new grille in place of the old one. (That is after I received the correct one, since I initially ordered a white one which definitely did not go with my stainless microwave!)
Parts Used:
Stainless Steel Vent Grill and Clips
  • Frances from Happy Valley, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave vent grill broken
Unpacked the replacement and popped it into place.
Parts Used:
Stainless Steel Vent Grill and Clips
  • Mark from Corpus Christi, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Vent grille broke
removed old grill and snapped new one in place. Quick delivery thanks
Parts Used:
Stainless Steel Vent Grill and Clips
  • Taylor from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave vint was broken
Was really easy I removed the old one and install the new one in just one minute.
Parts Used:
Stainless Steel Vent Grill and Clips
  • Basma from Charleston, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacement of charcoal filters in microwave
This wasn't really a repair, just an replacement of the filters, which is a regular maintenance requirement.
Parts Used:
Filter - Single
  • Hendrika from Campbell, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dropped the glass cooking tray and it broke in half
Looked up the Whirlpool Co. and ordered the part. It was quite simple. Arrived in 2 days and I simply placed it in the microware. It was very very easy!

E. Robinson
Parts Used:
Glass Cooking Tray
  • Emily C from Brandon, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grill Broke
SO EASY... It just clipped right in...
Parts Used:
Stainless Steel Vent Grill and Clips
  • Andrew from Carlsbad, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacement of hood light bulbs
Unplug the microwave. Then remove the six screws that hold the lower panel which has the light bulb cover and a couple of vent filters. The light bulb sockets are on a fixture that is connected by a quick connect electrical connector. Disconnect that and the whole panel is free to access the bulbs. My bulbs were very fragile and trying to twist them out resulted in the glass twisitng loose with the base still in the sockets. I needed to use a needle nose pliers to remove the bases and then I replaced the bulbs and put every thing back together
Parts Used:
Light Bulb - 40W
  • Jerry from Pine, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
vent grille was damaged and would not stay on.
easy squeasy, lemon-peasy. Took all of 15 seconds. Opening the box took longer than installing the vent. It just snaps right in place.
Parts Used:
Stainless Steel Vent Grill and Clips
  • Beau from Cary, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the YGH5184XPB2
61 - 75 of 169