Models > YG20HN3 Maytag > Parts

YG20HN3 Magic Chef Dryer - Parts

All parts for the Magic Chef Dryer YG20HN3

Below is a list of all parts for the Magic Chef Dryer YG20HN3 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the YG20HN3
1-14 of 161
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.


'M' Series New Style Coil Kit

This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.


Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.


High Limit Kit

This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258) the gas high limit (Limit: 240) and the gas and electric high limit thermostat (Limit: 300).


Lint Filter

This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide.


Door Catch Kit

This kit comes in two pieces: the catch and the clip.



This screw is sold individually.



This screw is sold individually.


Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer thi...


Blower Wheel Clamp

This clamp is used for the blower wheel.



This screw is sold individually.



Sold individually.


Door Seal

If this part appears to be too wide for your particular appliance, per the manufacturer, all you have to do is pull it apart.


Front Glide Kit

This kit includes 2 glides (left and right), 2 pads with adhesive backing and 1 support brace.

All Parts for the YG20HN3
1-14 of 161