Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YG20EN2 > Parts

YG20EN2 Magic Chef Dryer - Parts

All parts for the Magic Chef Dryer YG20EN2

Below is a list of all parts for the Magic Chef Dryer YG20EN2 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the YG20EN2
1-14 of 135
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.35

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

$15.40

'M' Series New Style Coil Kit

This gas dryer ignition coil set comes with two ignition coils: one three terminal Boost/Hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them as a set. Both have to be operational for the gas valve to open.

$27.70

Radiant Flame Sensor

This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made...

$15.68

High Limit Kit

This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258) the gas high limit (Limit: 240) and the gas and electric high limit thermostat (Limit: 300).

$12.97

Lint Filter

This lint filter screen has two side guides on either either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide

$15.35

Door Catch Kit

This kit comes in two pieces: the catch and the clip.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$16.13

Rear Drum Support Roller

This rear drum support roller is about three inches wide and comes with a bearing. Use it for your gas or electric clothes dryer.

$5.15

Screw

This screw is sold individually.

$50.89

Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer this kit has been updated now to have one spacer that is the thickness of 2 spacers. To get these parts separately, please search by model#.

$7.33

Blower Wheel Clamp

This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.

$24.72

Igniter with Wire Harness

This part lights the gas burner to create heat.

$10.89

Drum Glide and Cushion Kit

Pad has adhesive backing.

$4.89

Screw

Sold individually.

All Parts for the YG20EN2
1-14 of 135