Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YE20FY3 Maytag

YE20FY3 Magic Chef Dryer - Overview

Get Parts and Repair Help for YE20FY3

If you know the dryer repair part you need, you can browse the list of all parts on the YE20FY3, or you can search by name or part description. You can also find your part by where it is located on the YE20FY3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for YE20FY3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the YE20FY3

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.


Heating Element Kit - 240V 4750W

This kit comes with a high limit thermostat of L248-80.



This screw is sold individually.


Blower Wheel Clamp

This blower wheel clamp is less than an inch long and is used for some clothes dryers to hold the blower wheel firmly in place. This green clamp is made of metal.


Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer thi...


Rear Drum Support Roller

This rear drum support roller is about three inches wide and comes with a bearing. Use it for your gas or electric clothes dryer.


Screw, 8/18 x 3/8

This screw is sold individually.


Thermal Fuse


Drum Glide and Cushion Kit

Pad has adhesive backing.


Retaining Ring

This retaining ring is well under an inch long. Made entirely of metal, this ring is intended for use with some clothes dryers.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dry stopped heating - still had good air flow

  • Customer: Brianna from Littleton, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 162 of 187 people found this instruction helpful
I was about to purchase a new dryer because of the age of my dryer and not wanting to hire someone to fix it. After a little web research, I saw several do-it -yourself stories indicating this was a very easy repair.

This was an extremely easy repair and it save me lots of $$:
(1) Disconnected power
(2) Opened the top of the dryer
read more

broken tumbler belt

  • Customer: Michael from San Antonio, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 95 of 99 people found this instruction helpful
1. Removed the screws from the lint catcher
2. Removed the bolts from upper rear of dryer
3. Pried off the dryer top from the front (it rests on rear hinges)
4. Disconnected dryer door wiring
5. Removed bolt from inside upper front corners; removed front panel (be careful: the edges are sharp and the tumbler will fall when it loses suppor... read more

Dryer squeaking really badly

  • Customer: Michelle from Kirkwood, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 56 of 57 people found this instruction helpful
I opened the dryer from the front by pushing in on the two clips just under the top. I then had to remove two screws on each side and took the front panel off. I reached around underneath on the right side to slip the belt off the pulley. I pulled the drum out and then I could see the roller that was squeaking (the left one). The wheel had sheared some o... read more