Quick Question!

Have you ever purchased from PartSelect.com before?

Models > YE209KA > Parts

YE209KA Magic Chef Dryer - Parts

All parts for the Magic Chef Dryer YE209KA

Below is a list of all parts for the Magic Chef Dryer YE209KA - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the YE209KA
1-14 of 102
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.99

Multi Rib Belt - 92-1/4"

This dryer drum belt has four ridges, three grooves and is 1/4" wide.

$42.89

Heating Element Kit - 240V 4750W

This kit comes with a high limit thermostat of L248-80.

$5.15

Screw

This screw is sold individually.

$9.82

Blower Wheel Clamp

This blower wheel clamp is less than an inch long and is used for some clothes dryers. This green clamp is made of metal.

$53.71

Rear Drum Support Roller Kit

Included in this rear drum support roller kit are 4 screws, 1 spacers, 2 washers, 2 retaining rings, 2 rear rollers, and 2 cylinder support shafts. *** Note: Per manufacturer thi...

$16.88

Rear Drum Support Roller

This rear drum support roller is about three inches wide and comes with a bearing. Use it for your gas or electric clothes dryer.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$20.50

Thermal Fuse

$11.29

Drum Glide and Cushion Kit

Pad has adhesive backing.

$47.59

Front Glide Kit

This kit includes 2 glides (left and right), 2 pads with adhesive backing and 1 support brace.

$5.94

Retaining Ring

This retaining ring is well under an inch long. Made entirely of metal, this ring is intended for use with some clothes dryers.

$48.20

High Limit Thermostat (Limit: 258-80)

This high limit/safety thermostat is used on many gas and electric clothes dryers. It is made of metal, and is almost two inches long. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 258 degrees Fahrenheit. The element will kick back in when the temperature drops to 178 degrees Fahrenheit.

$4.79

Screw

This screw is sold individually.

$39.38

Blower Wheel - B/10 Models

This blower wheel is suitable for some clothes dryers of the 10 and earlier series. Manufactured to fit a 1/2 inch motor shaft, this blower wheel is 3-1/8 inches deep. The diameter of the wheel is 7-1/8 inches, and the spring clamp is not included.

All Parts for the YE209KA
1-14 of 102