Models > XRSS665BB

XRSS665BB (PXRSS665BB0) Amana Refrigerator - Overview

Get Parts and Repair Help for XRSS665BB

If you know the refrigerator repair part you need, you can browse the list of all parts on the XRSS665BB, or you can search by name or part description. You can also find your part by where it is located on the XRSS665BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for XRSS665BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$49.48

Ice and Water Filter

Sold Individually.

$2.70

Screw

This screw is sold individually.

$3.61

Door Closure Cam Kit

This part helps with the closing of the door and helps keep them in position.

$3.76

Crisper Frame Support

Note: If the wall anchor that this piece mounts on is broken, then the support is needed. (Order per Model#)

$52.91

Crisper Pan - Large

Sold individually.

$2.70

Screw

This screw is sold individually.

$4.46

Toe Grille Clip

$4.46

Shelf Support - Right Side

This right side shelf support is all white in color and it is made entirely of plastic.

$3.96

Shelf Support - Left Side

$3.96

Compression Nut

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door would not close

  • Customer: Russ from Asheville NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 36 of 39 people found this instruction helpful
After emptying the refrig. door, I unscrewed the plate on the top of the refrigerator that covered the door bolts. Then off with the three bolts. I removed the door by lifting it up a few inches. The two parts of the door cam were easily removed and replaced with the new part. BEFORE REPLACING the door spread vasoline on both cam parts.
(Not after as ... read more

Door cam worn out

  • Customer: william from avon OH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 17 of 18 people found this instruction helpful
remove top plastic cover / phillips screw driver
remove top door bracket / 5/15" socket
lift off door
remove pieces of old cam / phillips screw driver
replace cam/ phillips screw driver
replace door
replace top bracket / 5/16" socket
check alignment read more

Bottom freezer door hinge broke

  • Customer: Michael from Blue Springs MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 13 of 14 people found this instruction helpful
I removed the plastic cover from the top hinge and loosened the screws. The magnet seal kept the door in place so I removed the top hinge and tried to lift the door off the bottom hinge but the water line wouldn't let it go. Since I don't use the water feature, I just cut the water line and lifted the door off. That's when I discovered the hinge pin was a... read more