Models > XRSS267BB (PXRSS267BB0)

XRSS267BB (PXRSS267BB0) Amana Refrigerator - Overview

Get Parts and Repair Help for XRSS267BB

If you know the refrigerator repair part you need, you can browse the list of all parts on the XRSS267BB, or you can search by name or part description. You can also find your part by where it is located on the XRSS267BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for XRSS267BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$61.02

Ice and Water Filter

Sold Individually.

$2.70

Screw

This screw is sold individually.

$3.81

Door Closure Cam Kit

This part helps with the closing of the door and helps keep them in position.

$3.96

Crisper Frame Support

Note: If the wall anchor that this piece mounts on is broken, then the support is needed. (Order per Model#)

$4.46

Toe Grille Clip

$2.70

Screw

This screw is sold individually.

$56.08

Crisper Pan - Large

$58.89

Ice Bucket

$12.84

Icemaker Helix End Cap

This cap is white in color and is made of plastic. This end cap is used in a refrigerator's icemaker.

$28.51

Fan Blade

Used with Evaporator Fan Motors.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door would not close

  • Customer: Russ from Asheville NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 30 of 33 people found this instruction helpful
After emptying the refrig. door, I unscrewed the plate on the top of the refrigerator that covered the door bolts. Then off with the three bolts. I removed the door by lifting it up a few inches. The two parts of the door cam were easily removed and replaced with the new part. BEFORE REPLACING the door spread vasoline on both cam parts.
(Not after as ... read more

Ice maker would not turn allowing the ice to come out the dispenser. The ice bucket was also cracked from kids (ok and parents) getting frustrated and shaking the ice bucket!

  • Customer: Todd from Lancaster PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 22 of 23 people found this instruction helpful
Piece of cake!

Removed the old ice bucket which was cracked and ice would not dispense. The Helix Cap also looked worn which is why I ordered both parts. (Probably if not for the shaking of the ice bucket the Helix cap would have been the only part required. We ended up cracking the ice bucket) Removed the four hex screws from the auger system on... read more

Door cam worn out

  • Customer: william from avon OH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 17 of 18 people found this instruction helpful
remove top plastic cover / phillips screw driver
remove top door bracket / 5/15" socket
lift off door
remove pieces of old cam / phillips screw driver
replace cam/ phillips screw driver
replace door
replace top bracket / 5/16" socket
check alignment read more