Models > XRSR665BW

XRSR665BW (PXRSR665BW0) Amana Refrigerator - Overview

Get Parts and Repair Help for XRSR665BW

If you know the refrigerator repair part you need, you can browse the list of all parts on the XRSR665BW, or you can search by name or part description. You can also find your part by where it is located on the XRSR665BW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for XRSR665BW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$53.16

Crisper Pan - Large

Sold individually.

$4.46

Crisper Frame Support

Note: If the wall anchor that this piece mounts on is broken, then the support is needed. (Order per Model#)

$2.71

Screw

This screw is sold individually.

$5.75

Door Closure Cam Kit

This part helps with the closing of the door and helps keep them in position.

$15.05

Fan Blade

Used with Evaporator Fan Motors.

$4.90

Screw

This screw is sold individually.

$4.48

Shelf Support - Left Side

$5.89

Shelf Support - Right Side

This right side shelf support is all white in color and it is made entirely of plastic.

$6.28

Toe Grille Clip

Sold individually.

$4.73

Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 640 of 680 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

The crisper drawer was broken on the slides and kept falling out. Also the filter needed changing as the red light was on.

  • Customer: Stanford from Bowling Green, KY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 199 of 282 people found this instruction helpful
By sliding the drawer out and lifting it up at the end, the drawer will come right out. By installing the new drawer in the same sequence, the job is completed. As for the filter, it is located inside the refrigerator compartment on the upper right side.Simply remove any items from the top shelf that may be in the way, and then push in on the tab that exten... read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 196 of 286 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more