XGHS2645KF1 Frigidaire Refrigerator - Instructions

Pull out the old clips,that were crack.The new ones are hanging off.I don'nt know if i should put some kind of glue,or something.To help it stick on.

Removed the old gasket and installed the new one. Really, really easy to do. Took me about ten minutes.

So easy ... all I had to do was to snap the shelf into place - all of 2 seconds. The best part of the process was ordering the exact part I needed and how quickly it was received - awesome service. Thank you.

very easy just snaped shielf in

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I diagnosed the problem by checking the water flow at the supply valve and hose by disconnecting the hose from the back of the fridge. Found the pressure to be adequate. I then reconnected the supply hose and removed the cardboard backing from the fridge and removed the nuts holding the water inlet valve to the chassis. I loosened the first hose that runs from the bottom of the valve and had my wife activate the valve by pushing the water switch on the front of the fridge. Water basically sputtered out of the valve and I decided that was where the problem was. I ordered the valve from partselect. When it arrived I thought it was the wrong part because it had push-fittings whereas my original valve was all thumb screws. I took a chance and one by one used a utility knife to cut the hose free of the old valve as close to the nut as possible. Connecting them to the new valve was a piece of cake! Just make sure the hose bottoms out when you push it in. I turned the water back on, no leaks! Plugged the fridge in and pushed it back to the wall. After a bit of air bled out I had a strong flow of wateragain like new! The next day the ice cubes were solid again! We use the filtered water so many times a day and had been so frustrated with the slow water flow we had considered donating the fridge and buying a new one; thanks to this easy fix we expect keep it for years to come!

Upon receipt of replacement part I simply snapped it into place. More accurately, the "less than 15 mins" above was more like less than 15 seconds. Ordering this part was easy and clearly understood. I ordered about noon one day and received the FedEx shipment evening of the following day. Incredible! While somewhat pricey for what the part is I understand the costs associated with stocking minor parts and am totally happy with my whole shopping experience at PartSelect. I have already recommended PartSelect to others and have bookmarked the website for future reference as needed.

Pulled out the old bin, slid in the new bin. Bingo. Like new again.

Snapped into place- no tools

Push in on filter and it releases pull filter out. Slide new one in push in and it locks it. Run water for 2 minutes and it is finished

Pulled out old drawer. Slid in new drawer.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

just installed new shelf

Replaced them

Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.