Models > X24004F00 > Instructions

X24004F00 Roper Air Conditioner - Instructions

All installation instructions for X24004F00 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the air conditioner repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the X24004F00
1-6 of 6
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

AC WOULD COOL BUT COMPRESSER WOULD NOT CYCLE ON &OFF

  • Customer: Ron from Knob Noster MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 10 people found this instruction helpful
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons

Filter was filthy, no telling how long it had been since changed

  • Customer: SHIRLEY G. from Mabank TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Took out old filter and replaced it with the new filter

Needed new Ice Maker

  • Customer: Joseph from Liberty MS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench(Adjustable)
  • 4 of 9 people found this instruction helpful
Removed back cover, and installed the water valve. Removed the water supply tube cover and installed the supply tube. Opened freezer and removed the electrical cover, removed the knockouts and pulled line out. Hooked up ice maker and installed it to wall. Turned water on and waited a couple hours, it is making ice. Installing the ice maker was easy. Running water line to it........well that is another story. LOL.

old filter had become brittle & needed replacing

  • Customer: Rhea from Plainview TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 10 people found this instruction helpful
Just removed the old filter and replaced. Slid right in, no tools required.

Both motor clips broken - >40 year old dryer!!

  • Customer: susan from Socorro NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)

Knob was very difficult to attach. It fits very tight.

  • Customer: Ruth from Fall River MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Had to get someone else to attach knob
All Instructions for the X24004F00
1-6 of 6