Quick Question!

Have you ever purchased from PartSelect.com before?

Models > X24004A1

X24004A1 Roper Air Conditioner - Overview

Get Parts and Repair Help for X24004A1

If you know the air conditioner repair part you need, you can browse the list of all parts on the X24004A1, or you can search by name or part description. You can also find your part by where it is located on the X24004A1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Cover Screw

Sold individually.

$4.79

Washer, Support

This part is located on the drum roller support shaft in your dryer appliance. The exterior of the washer is 1 inch in diameter with a hole in the middle and is made of metal. They are installed alongside the drum support rollers and idler pulleys. If you notice that your dryer is making an unusual sound it could be due to the washer becoming loose on the drum support. They help prevent the rollers and pulleys from bumping up against the brackets they are installed on. If you are replacing the rollers, we suggest you replace the washers at the same time.

$3.75

Hex Nut

This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, ref...

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

$3.75

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$23.16

Motor Clip

$30.25

Silicone Rubber Adhesive - 2 oz

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application re...

$6.20

TIE-WIRE

$56.02

Air Filter

This part is sold individually. The air filter is part of your room air conditioner and prevents dirt, dust, and other debris found in the air from getting inside your home. Over t...

Selector Switch

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ac Would Cool But Compresser Would Not Cycle On &Off

  • Customer: Ron from Knob Noster, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 6 of 12 people found this instruction helpful
Replaced the temp control and sensor. Controls on this unit are easy to get to and electrical connections were slide ons read more

Filter was filthy, no telling how long it had been since changed

  • Customer: SHIRLEY G. from Mabank, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 8 people found this instruction helpful
Took out old filter and replaced it with the new filter read more

Needed new Ice Maker

  • Customer: Joseph from Liberty, MS
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 4 of 9 people found this instruction helpful
Removed back cover, and installed the water valve. Removed the water supply tube cover and installed the supply tube. Opened freezer and removed the electrical cover, removed the knockouts and pulled line out. Hooked up ice maker and installed it to wall. Turned water on and waited a couple hours, it is making ice. Installing the ice maker was easy. Ru... read more