X12002V0 Roper Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
switch shaft was broken.
ordered new part, removed old unit, noted where wires connect, installed new one, done.
Parts Used:
-
John from Burton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
22 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
screw holes didn't line up
I received the part the very next day which was awesome, but when I went to install it, there was a connection discrepency on the back of the switch, and the screw holes were completely off in the front where it connects to the unit. I ended up taking the whole thing apart to try to put the old face with the right screw holes on the new part and ruined it.
Parts Used:
-
Dena from Coral Gables, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
7 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Control Of Temp.
The part was easy to remove and replace. Instructions were easy to understand. Once removed and replaced. The a/c worked great. I could control the temp and not be freezing all the time.
Parts Used:
-
RICHARD from SAN ANTONIO, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
23 of 157 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!