Models > WWSS2601KW0 > Instructions

WWSS2601KW0 Westinghouse Refrigerator - Instructions

All installation instructions for WWSS2601KW0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the WWSS2601KW0
616-630 of 653
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

bottom door bin broke

  • Customer: Dawn from Kansas City KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
slide the new bin into the door. Took 2 seconds.

Broken door handle

  • Customer: Larry from Salem OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Even though we did not have the model or part number I was able to easily locate the exact part because of your photo, dimensions and video instructions.

ref freezing up and freezer not making ice

  • Customer: melvin from hobbs NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
replace the control panel and harness

Broken bins

  • Customer: Robert from Norfolk VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced bins

The drawer slides / tracks were broken

  • Customer: ann from raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled out the drawers, lifted out the frame and the glass, dropped the new frame in, put the glass on the new frame, and then the drawers slid right back in on the unbroken tracks. Probably the easiest repair ever. It took longer to clean the refrigerator and the drawers than it took to replace these items.

WATER DISPENSER ACTUATOR BROKEN

  • Customer: marvin from columbia TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed tray by pulling out.Took out three screws at bottom. Lifted up on face plate.Remove three screws at top,pulled out to access actuator,relieved spring.Then took out screw on the right,loosened two screws on the left and removed broken part.Put in new part and reassembled.

I broke the bottom bin on the refrigerator door

  • Customer: Jane from Mequon WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The 2 door bins came in 3 days! I could not believe how fast the service was. The door bins just slid right into place, not tools required. They look great. Special shout-out to Jennifer T. who helped me over the phone. I placed the order for the bottom door bin and later realized that I could add one more door bin to the refrigerator door to make more storage area. I called the customer service number and she canceled my order. She sent me a follow up email and I was able to place a new order to get both door bins and save on shipping fee. PartSelect was great! Thank you!

broken shelves

  • Customer: Chase from Conyers GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
parts fit perfectly

Drawer support broke.

  • Customer: nancy from Bellingham WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I was worried that the support was a permanent fixture in the refrigerator wall. But I pried it out and replaced it with the new part. Holes were exactly the same size so the new part easily replaced the old one.

support clips broken for 2 bins

  • Customer: Thurlowe from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Purchase was easy. Delivery was quick. Install videos was accurate. Made it eady to as DI project. Safe place for purchase and support. Saved on cost of professional visit.

Needed to replace split door seal

  • Customer: Maridell from Lexington SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
It took about 5 minutes to pull the old seal out and replace with the new one. Simple enough for a 71 year old woman to do alone.

Refrigerator door would not close properly

  • Customer: Jeff from Rapid City SD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
We watched your video online and just followed the instructions. It was super easy to follow and install the new parts. We would highly recommend your site to anyone. The parts came in the mail in 3 days. Thank you very much for saving us to call a repair person and saving us about $100.

Compressor running constantly with freezer temperature at -20 degrees fahrenheit.

  • Customer: Steven from Raymond NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Since the evaporator was all iced up, I decided to replace the least costliest item (defrost thermostat kit); did not resolve the problem. Once I replaced the freezer temperature control thermostat, the freezer temperature stabilized right at 0 degrees fahrenheit with dial on factory setting. Compressor no longer running constantly.

Leaking water filter cup

  • Customer: Bobby from Mckinney TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Initially I changed the filter, but in so doing, I misplaced the o ring located in the filter cup; without that o ring water leaks out every time it cycles. I purchased the o ring online (five dollars plus eight dollars to ship) and bingo no more leaks.

Plastic bearing broke on refrig door

  • Customer: William from Ashland KY
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
The part number was easy to find on the diagram. Delivery was as promised. Instructional film was very helpful and reassuring. Only problem was that the broken part left in the door was difficult to remove as it was distorted and would not slide out. Took considerable persuasion by screwdriver and pliers to remove remaining portion. New part went right in and reassembly was easy. Door works fine now.
All Instructions for the WWSS2601KW0
616-630 of 653