WWSS2601KW0 Crosley Refrigerator - Instructions

Upon receipt of replacement part I simply snapped it into place. More accurately, the "less than 15 mins" above was more like less than 15 seconds. Ordering this part was easy and clearly understood. I ordered about noon one day and received the FedEx shipment evening of the following day. Incredible! While somewhat pricey for what the part is I understand the costs associated with stocking minor parts and am totally happy with my whole shopping experience at PartSelect. I have already recommended PartSelect to others and have bookmarked the website for future reference as needed.

Pulled out the old bin, slid in the new bin. Bingo. Like new again.

Snapped into place- no tools

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.

I watched a "how to repair" video on PartSelect. Everything went just as described until I realized that the actuator I was replacing had two tiny lights with wires attached. Perhaps I ordered the wrong part but it looked like the part I ordered would still fit but just not have the lights. I really didn't think it was necessary to have lights so I used scissors and clipped the wires so I could remove the old actuator. Then I continued to follow the directions in the video and now I have a perfectly functioning water dispenser. My husband was so proud of me! One additional tip- I found it was helpful to use a flashlight so I could see really well.

two screws fingers pop the hoses off done in 4 minutes

Pulled out old drawer. Slid in new drawer.

Remove 4 screws to get the housing cover off. Remove the lock ring that holds the ice auger in place. REmove 4 screws to get the crusher housing off. Reverse the order to replace the housing. Very simple.

just installed new shelf

Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

Replaced them

I watched the step by step video. I t was a breeze. Thanks for the fast service and number 1 video to show me how to install

Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

A part replacement. I was extremely happy to find the somewhat obscure part at Parts Select and at a very reasonable price. The part arrived in three days and fit perfectly. Very satisfied!!!