Models > WWGF3004KWG

WWGF3004KWG Westinghouse Oven - Overview

Get Parts and Repair Help for WWGF3004KWG

If you know the oven repair part you need, you can browse the list of all parts on the WWGF3004KWG, or you can search by name or part description. You can also find your part by where it is located on the WWGF3004KWG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WWGF3004KWG [Viewing 6 of 6]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$26.43

Natural Gas to Liquid Propane Conversion Kit

This kit is used to liquid propane.

Order within the next 12 hrs and your part ships today!
$28.96

Oven Probe

This temperature sensor detects the temperature within the oven cavity.

Order within the next 12 hrs and your part ships today!
$19.48

Light Bulb Lens

This lens covers the interior oven light bulb.

Order within the next 12 hrs and your part ships today!
$32.84

Broiler Pan

Pan Only. Must order insert separately.

Order within the next 12 hrs and your part ships today!
$7.32

Front Drawer Glide

Order within the next 12 hrs and your part ships today!
$7.99

Anti-Tip Kit

This kit comes with two installation screws.

Order within the next 12 hrs and your part ships today!
$7.32

Rear Drawer Glide

Sold Individually.

Order within the next 12 hrs and your part ships today!
$29.09

Rack

Order within the next 12 hrs and your part ships today!
$7.43

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Order within the next 12 hrs and your part ships today!
$4.41

Steel Washer

Size: 3/4 inch od x 1/4 inch id

Order within the next 12 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove was set up for natural gas and needed to be converted to LP

  • Customer: Ed from Orange TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 84 of 134 people found this instruction helpful
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.

Used the screwdriver to adjust the low flame and everything was done. read more

Bought a new gas oven that did not come with a propane conversion kit.

  • Customer: Denny from Bishop CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Wrench set
  • 71 of 104 people found this instruction helpful
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. ... read more

Oven wouldn't operated. Error code F9

  • Customer: Richard from Centennial CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 24 of 28 people found this instruction helpful
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws ... read more