Models > WWEF3005KWD

WWEF3005KWD Westinghouse Range - Overview

Get Parts and Repair Help for WWEF3005KWD

If you know the range repair part you need, you can browse the list of all parts on the WWEF3005KWD, or you can search by name or part description. You can also find your part by where it is located on the WWEF3005KWD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WWEF3005KWD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WWEF3005KWD [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.59

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$3.59

Chrome Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$5.96

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$13.79

Surface Element - 8" - 220V

4 Turn.

$21.41

Infinite Burner Switch - 8" - 240V

This switch controls the stove top 8" surface burner.

$18.68

Surface Element - 6"

Sold individually.

$28.96

Oven Probe

This temperature sensor detects the temperature within the oven cavity.

$25.18

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$19.48

Light Bulb Lens

This lens covers the interior oven light bulb.

$32.84

Broiler Pan

Pan Only. Must order insert separately.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Back Burner didn't function

  • Customer: William from Burke VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 54 of 56 people found this instruction helpful
We moved into our townhouse about 6 yrs ago. During the home inspection we checked the range and saw the Red light come on when we turned on each burner. After moving in we realized the large back burner did not work. The light came on but the element never got hot. I of course replaced the element but that did not work. Several years passed and we just ... read more

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 30 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

Oven wouldn't operated. Error code F9

  • Customer: Richard from Centennial CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 23 of 27 people found this instruction helpful
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws ... read more