Models > WWEF3005KWC

WWEF3005KWC Westinghouse Range - Overview

Get Parts and Repair Help for WWEF3005KWC

If you know the range repair part you need, you can browse the list of all parts on the WWEF3005KWC, or you can search by name or part description. You can also find your part by where it is located on the WWEF3005KWC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WWEF3005KWC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WWEF3005KWC [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.71

Drip Bowl - 8"

$3.71

Chrome Drip Bowl - 6"

Sold individually.

$21.41

Infinite Burner Switch - 8" - 240V

$7.13

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$22.04

Surface Element - 8" - 220V

4 Turn.

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$24.52

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$18.68

Surface Element - 6"

$28.21

Oven Probe

$47.82

Bottom Panel

This is used as the "floor" of the oven cabinet.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Back Burner didn't function

  • Customer: William from Burke VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 33 people found this instruction helpful
We moved into our townhouse about 6 yrs ago. During the home inspection we checked the range and saw the Red light come on when we turned on each burner. After moving in we realized the large back burner did not work. The light came on but the element never got hot. I of course replaced the element but that did not work. Several years passed and we just ... read more

Top Broiler element burned out

  • Customer: Richard from Alexander City AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Socket set
  • 20 of 27 people found this instruction helpful
I disconnected power cord. Removed cooking racks. Removed element mounting screws. Removed back panel and removed wires on both ends. Pulled element out put new one in and bolted down. Reconnected wires. Put rear cover on. Plugged in and checked for correct opreation. OK! read more

If burner was placed on HIGH, it wouldnt lower heat once LOW setting chosen

  • Customer: Juilo from Lake City FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 16 people found this instruction helpful
I had to replace the switch in the back of the control knobs. I was very grateful to the female phone attendant who answered my call. Since my part number had switched a few times, she took the time to reverify the "blueprints" of my machine with the parts carried at Parts Select and she helped me be assured that I was buying the correct part for my machin... read more