WWEF3004KWE Westinghouse Range - Instructions

Fortunately the bird was completely done. I viewed the video on replacing the part , and ordered it that night. It shipped in a resonable amount of time , and was a breeze to install. I'll continue to purchase from your company when needed, Thank You, Tim M. Delaware

The repair was easy.it took only minutes to install.The how to video was a big help.thank you parts select!

Removed the door and carefully dismantled all of the layers. In my particular situation, I needed to do some high heat painting as over the years the white panels had discolored due to heat. So, I had to wait a day or so for the painted panels to dry--but they looked great when done. Some words of caution, really look the diagrams over and be sure you are ordering the correct glass (there are three and all different). I initially ordered the wrong one but used it anyway as it replaced a badly stained one. But, I had to re-order the correct glass. It was amazing how quickly I got both orders, though. Only took a couple of days!! So, am very pleased with the way it looks--like new again and quite easy if done systematically!

I order my new part from you, I was very please with your severice,.... Great prices and next day delievery... Thank you so much When I need parts for anything I will be back,,,, Thank you .... Tammy

Inserted the new rear drawer glides

the rear glides were missing on the back of the drawer so the drawer would pull out but when pulled back in, would tip down and not catch on anything. I ordered the parts then found an instructional youtube and watched it. Easy repair, cheap!

I removed two screws from inside the oven and pulled out the broken element and replaced with new one in just a few minutes,it was so simple!

Easy to put in but i droped a screw to hold the element. had to pull another screw to fix it

An appliance repair man came to my house told me it would cost me $400 dollars to replace my broken control panel and he would have to come back since it needed to be ordered. At this point I had no idea what it was, were it was and how hard it was to fix. But after hearing the total $400 uttered from the obviously delusional repair man, I swiftly kicked him out of my house. Took me 15 minutes to do the research to find what I needed. I ordered the part. 3 days later it arrived. I went back online to watch a 3 minute instructional video. I changed it out in less than 5 minutes. Saved $300 bucks!

Removed two screws , unplugged old element , plugged in new element , installed the two screws and the oven was back in business . I did cut the power to range/oven before starting .

unplug bad element,plugin the new one

It was the holiday season and all through the house, cries of "what's wrong with the oven?" were heard from my spouse. "I know you can fix it!" she said, trying to flatter, so I logged on to Partselect.com to see what was the matter. I found what I needed and ordered with a click, and to my surprise my part arrived quick. I unplugged the oven, thinking "safety first" and bent down to inspect it, expecting the worst. With flashlight, wrench and pliers and still feeling queasy, I was surprised to find out that it was really quite easy. The two screws in the flanges came out with a twist and the terminal slid off, no need for a fist. With the new element in place and the terminals on, the screws were replaced and the repair was all done. “You really DID fix it” she said with a look, “Now get out of my way, I gotta cook!”

I watched the video that was furnished online and did what they said. . . . . I do alot of do-it-yourself project. . . . Because of my income input. . . So this probably saved me a lot of repair man expense. . . . Linda

I read other experiences on line and determined that it was either the element of the control switch. So I decided to order the control. When deciding I had removed the upper back sheild and put it back on. Subsequently a couple of days later there were popping noises culminating in a flash and the stove went 'dark'. I figured that I had pinched a wire when I put the upper shield back on. I removed the shield and looked for black 'short' marks. None were visible. I went to the electric panel and tried to reset the 60 amp breaker. It wouldn't reset and momentarily the lights dimmed. Uh-oh! Went back to stove and opened area where the cord connects to the stove. Direct short- a lose terminal block bolt had welded itself to the chassis! I redid all connections and lined inside of stove back with duct tape- also redid the connections with bolts, nuts and lockwashers covered each with electrical tape. Now reconnecting electric I put the new switch in. Removed the knob from the front and started to transfer the wires from the back. This was a little confusing because the control I received looked different from the one in the stove. After some checking I looked closely at the terminals on each control and they had tiny number/letters on them like H1, Li, H2 etc. So I just transferred H1 0n one cntrol switch to H1 on the new switch- L1 to L1 and so on. Put it all back together, turned on power and everything is working great.

Took a set of pliers and popped the old ones out and snapped the new ones in