Quick Question!

Have you ever purchased from PartSelect.com before?

Models > WWEF3000LWB

WWEF3000LWB Westinghouse Range - Overview

Get Parts and Repair Help for WWEF3000LWB

If you know the range repair part you need, you can browse the list of all parts on the WWEF3000LWB, or you can search by name or part description. You can also find your part by where it is located on the WWEF3000LWB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WWEF3000LWB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WWEF3000LWB

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$5.92

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$5.09

Chrome Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$6.08

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$11.36

Surface Element - 8" - 220V

4 Turn.

$17.80

Surface Element - 6"

Sold individually.

$111.20

Broil Element - 2400W

This part goes inside of your oven at the top.

$50.39

Oven Rack

Sold individually.

$8.39

Anti-Tip Kit

This kit comes with two installation screws.

$5.24

Leveling Leg

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 987 of 1021 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 677 of 771 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 412 of 421 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more