Models > WWEF3000KWA

WWEF3000KWA Westinghouse Range - Overview

Get Parts and Repair Help for WWEF3000KWA

If you know the range repair part you need, you can browse the list of all parts on the WWEF3000KWA, or you can search by name or part description. You can also find your part by where it is located on the WWEF3000KWA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for WWEF3000KWA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the WWEF3000KWA [Viewing 5 of 5]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.64

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$3.71

Drip Bowl - 8"

$3.71

Chrome Drip Bowl - 6"

Sold individually.

$7.13

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$22.04

Surface Element - 8" - 220V

4 Turn.

$46.11

Oven Rack

Sold individually.

$18.68

Surface Element - 6"

$105.30

Broil Element - 2400W

$4.23

Steel Washer

Size: 3/4 inch od x 1/4 inch id

$7.09

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Element cracked in two pieces

  • Customer: Michael from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 474 of 559 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 374 of 377 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more

heating element went out

  • Customer: LINDA from PERRYSBURG OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 145 of 212 people found this instruction helpful
My husband called our one and only parts store and got a price of $50 for the element. I used a search engine over the weekend and found the same thing for almost half the price. I received an email that said the element was shipped out on Monday, and it arrived on Tuesday afternoon! So my husband removed the two screws that hold the element in place, then r... read more