Models > WU3006V1

WU3006V1 Roper Dishwasher - Overview

Get Parts and Repair Help for WU3006V1

If you know the dishwasher repair part you need, you can browse the list of all parts on the WU3006V1, or you can search by name or part description. You can also find your part by where it is located on the WU3006V1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for WU3006V1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.51

Lid Spring

This metallic spring is for your dishwasher's soap cup cover.

$3.96

Rubber Washer

Sold individually. Used with the heating element.

$2.70

Hose Clamp

$4.65

Touch-Up Paint - White

$17.52

Detergent Dispenser Cover Kit

This kit also includes the lid hinge pin, spring, snap and latch.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$18.96

Drain Check Valve with O-Ring

$2.70

Cover Screw

Sold individually.

$2.70

Screw - 8-18 x 1/2

Sold Individually.

$15.10

Tandem Rack Rollers - Set of 4

Each tandem roller holds two wheels. There are four sets of tandem rollers in this roller kit, so you will be getting eight wheels in all. They are all white, and are meant for use on the lower rack of your dishwasher.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dishwasher Not Draining

  • Customer: Lewis from Portsmouth NH
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 94 of 130 people found this instruction helpful
Ordered both drain & wash impeller kit and the drain check valve with o-ring. Decided to test the cheaper drain check valve first. Pulled dishwasher out from wall & adjacent cabinetry; removed drain hose from disposer and drained as much water as possible; "jacked" side of dishwasher to gain access to drain hose and drain check valve; used pliers to remove ... read more

Tines were broken and rack was damaged

  • Customer: Dennis from Littleton CO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 34 of 59 people found this instruction helpful
Replaced the dish rack.

Removed the retaining clips on the front of the rail and removed the old rack.

Removed the spray arm assembly from the old rack.

Assembled the new rack, with the supplied parts from the kit. Using the old rack to know where some parts needed to be placed.

Put the spray arm assembly on the... read more

Lower Dishwasher rack replacement

  • Customer: Claire from Saratoga springs NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 23 of 34 people found this instruction helpful
I ordered the part and was hoping to just take out one rack and put in the other, there were NO instructions or even a diagram of the rack. There was a fold down rack that was not attached and a few parts that I have no idea what they are. This was very discouraging. The main thing is that the rack is quite a bit lighter than the original one so I doubt i... read more