This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$152.28
In Stock
Questions And Answers for WTW8900BC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rena
January 3, 2022
The hinge cover has come away from the glass lid on the right side. When you try to close it, it sticks up
For model number WTW8900BC0
Hi Rena,
Thank you for your question. If the hinge cover has come away from the lid and it sticks up when you try and close it, then the lid hinge assembly will likely need to be replaced. The part number listed under your model number for the lid hinge assembly is PS11756125. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
If water constantly flows into washer does the inlet valve kit need replacing
For model number WTW8900BC0
Hi Paul, thank you for contacting us. Yes, if water constantly flows into the washer, it means that there is an issue with the water inlet valve, part number PS11731257. You may need to replace it to fix the issue. We hope that helps!
Need to know how to open top of washer to repair broken lid part.
For model number WTW8900BC0
Hello Jack, thank you for your question. The lid is part PS11728069. We have a video for a similar model that may be of assistance. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Wee have a Whirlpool cabrio platinum washer and about 1.5 years ago started getting codes like SD, LF, found out it was the basket hub so got replacements and changed easy from this site. However, this part seems to go out every couple of weeks now and we are always replacing. The teeth on the part seem to wear off so fast and we don't know why it just keeps going bad. It also will only run on perm press cycle, if I try to wash anything on any other cycle, I get an error code of LF. Is there another part that we need to replace so that this basket hub doesn't keep going out? I keep 3 on hand at all times now bc it goes out so much. ser number is C34370589 and mod is wyw8900bc0
For model number WTW8900BC0
Hello Maurin, thank you for contacting us. Based on our research, if LF (too long to fill) error codes appear in the display, the washer is taking too long to fill. We would recommend checking the water inlet valve, part number PS11731257, to fix the issue. Before replacing the water inlet valve, you may need to check that the hoses are not clogged and the pressure of the water is as desired. We hope this solves your problem!
Hi Penny, thank you for reaching out. The Ld error code is a short form for a long drain. It usually indicates that the washer is taking too long to drain. We would suggest checking the plumbing for the correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub. Do not tape over the drain opening. Lower the drain hose if the end is higher than 96" (2.4 m) above the floor. Remove any clogs from the drain hose. If the washer still does not drain properly, the drain pump, part number PS11754363, might be faulty. We hope this information helps!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitratin
... Read moreg oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.