This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
This part makes sure that the lid is shut before allowing the machine to start or agitate.
NOTE: This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
December 10, 2019
Need to know how to take the lid off to see why it pops up on the right side it wont stay up by its self need to know how to take it off before ordering a part
For model number WTW8800YC1
Hello Pat, Thank you for the question. On each side there is a a screw at the back corners to remove then you will just need to pull out the hinge to remove the lid. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carl
January 31, 2023
Glass washer cover will no longer stay up when opened to permit loading of washer.
For model number WTW8800YC1
Hi Carl,
Thank you for your question. If the lid is not staying up, there may be an issue with the hinges and the lid hinge arms and they will need to be replaced. The part number listed under your model number for the left side lid hinge is PS11728070. The part number listed for the left side lid hinge arm is PS11756126. The part number listed for the right side lid hinge assembly is PS11728071. The part number listed for the right side lid hinge arm is PS11756125. If you would like to place an order for these parts, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Washer us beeping but not coming on, it stopped working when it went into spin cycle
For model number WTW8800YC1
Hi Walter, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the control board, part number PS10066101, to fix the issue. It manages the washer's functions such as filling, washing, draining and spinning. We hope this solves your problem!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitratin
... Read moreg oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.