Models > WTW5610XW1

WTW5610XW1 Whirlpool Washer - Overview

Get Parts and Repair Help for WTW5610XW1

If you know the washer repair part you need, you can browse the list of all parts on the WTW5610XW1, or you can search by name or part description. You can also find your part by where it is located on the WTW5610XW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WTW5610XW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$43.77

Lid Latch Assembly

The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the wa...

$2.03

Lid Hinge Mounting Screw

Sold individually.

$4.65

Touch-Up Paint - White

$3.96

D-Shaped Knob Insert

This insert is sold individually. Knob not included. Knob is sold separately.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$3.96

WASHER

$2.70

Hose Clamp

This hose clamp is sold individually.

$20.76

BELT

$22.82

STRIKE

$2.48

Lid Bumper

This gray and white washer lid bumper contains a rubber bottom and is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lid Lock light blinking, machine will not start

  • Customer: David from Los Alamos NM
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 33 of 40 people found this instruction helpful
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not le... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 11 of 13 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

Both outside door handles turned very beige

  • Customer: Howard from Boynton Beach FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 4 of 12 people found this instruction helpful
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles.... read more