WTMC6500UC-01 Bosch Dryer - Instructions

Remove 4 screws on plastic cover of hinge that connects to the door. An assistant will come in handy at this point to hold the door. Then remove 2 screws holding hinge. Push up on hinge and pull out to remove hinge bracket. Hinge pins has plastic covers that need to be in place before attaching to the door. A small amount of vaseline will hold them in place.

For this dryer a ratcheting screwdriver set was a must. Follow the directions from previous posts and you're done. Easy 5 minutes!

Removed old hinge and replaced with new.... Door works great! Thanks

The delivery date blew past and at day 11 of waiting, I fabricated a new hinge in my shop out of steel. The crappy pot metal replacement showed up two days later=13 days late. Now i have this $40 piece of pot metal garbage laying around that I'll never use because I made a hinge out of steel LIKE THE FACTORY SHOULD HAVE DONE IN THE FIRST PLACE. You people could have put the part in a $7 mailer envelope from the post office instead of shipping with the worst delivery agent in the free world (FedX). I hope I never need anything from your store again.

I was blown away with the quick response it was delivered to my door within 24 hrs and I only paid for 2-3 day delivery. I followed the instructions enclosed with the new hinge and it was done within 10 minutes. Most of the time was taken up with trying to plug in the dryer in the back wall, it was set too low and I had to unplug the washer so I could use the dryer, I will have to replace the plug so it can handle both dryer and washer. We were only at our house in CA for 3 days then we returned to Oregon so the next trip I will follow up with a new gasket for my washer. It was in storage for over 2 years and it has an odor to it but it stll washes great. Love my bosch.