WTMC6300US-01 Bosch Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Top of door hinge arm broke.
Remove 4 screws on plastic cover of hinge that connects to the door. An assistant will come in handy at this point to hold the door. Then remove 2 screws holding hinge. Push up on hinge and pull out to remove hinge bracket. Hinge pins has plastic covers that need to be in place before attaching to the door. A small amount of vaseline will hold them in place.
Parts Used:
-
Philip from MOCKSVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top part of door hinge broke
For this dryer a ratcheting screwdriver set was a must. Follow the directions from previous posts and you're done. Easy 5 minutes!
Parts Used:
-
Mark from SHERIDAN, MT
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door hinge broke
-
Laurence from WEBSTER, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat on the dryer
Did a quick on line search of the problem and found the Limiter Switch is normally the solution.....loaded the model number in the PartSelect data base and received the correct part the next day (standard shipping)! Replaced the part in about 45 mins and works perfectly. While I was ordering the Limiter switch I figured it was a good time to replace the drum light bulb as well. Again, perfect match. Great experience with PartSelect, will be sure to use them again!
Parts Used:
-
David from Southlake, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The pot metal door hinge broke so I ordered on from this company.
The delivery date blew past and at day 11 of waiting, I fabricated a new hinge in my shop out of steel. The crappy pot metal replacement showed up two days later=13 days late. Now i have this $40 piece of pot metal garbage laying around that I'll never use because I made a hinge out of steel LIKE THE FACTORY SHOULD HAVE DONE IN THE FIRST PLACE. You people could have put the part in a $7 mailer envelope from the post office instead of shipping with the worst delivery agent in the free world (FedX). I hope I never need anything from your store again.
Parts Used:
-
David from FLINTVILLE, TN
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Wrench set
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
converted dryer door from right hinge to left hinge
I was blown away with the quick response it was delivered to my door within 24 hrs and I only paid for 2-3 day delivery. I followed the instructions enclosed with the new hinge and it was done within 10 minutes. Most of the time was taken up with trying to plug in the dryer in the back wall, it was set too low and I had to unplug the washer so I could use the dryer, I will have to replace the plug so it can handle both dryer and washer. We were only at our house in CA for 3 days then we returned to Oregon so the next trip I will follow up with a new gasket for my washer. It was in storage for over 2 years and it has an odor to it but it stll washes great. Love my bosch.
Parts Used:
-
MANNIE from LINCOLN, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!