Models > WTF330HS2 > Parts

WTF330HS2 Westinghouse Washer - Parts

All parts for the Westinghouse Washer WTF330HS2

Below is a list of all parts for the Westinghouse Washer WTF330HS2. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the WTF330HS2
1-14 of 109
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Door Lock and Switch Assembly

NOTE: As per the manufacture, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require t...


Door Strike

Use with front load washers.


Shock Absorber Kit

This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorou...


Single Spring with Insulators


Drain Pump - 60Hz 120V

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.




Drive Belt - 6 ribs


Drain Hose


Tub-To-Pump Hose


Drum Vane

Also known as a Drum Baffle. Sold individually.


Water Valve - 115V

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount o...


Bellow with Clamp

Also known as the door boot seal. This part is used to keep the clothes inside the tub during the wash cycle. The folds in the bellow allow the tub to move separately from the door during the spin cycle.


Pump Filter


Control Rotary Knob

Sold Individually. This knob accepts a D-shaped shaft.

All Parts for the WTF330HS2
1-14 of 109