This drain hose is a genuine OEM replacement part supplied by LG for use in their washing machines. It is a light gray pipe with a diameter of 1.25 inches. The drain hose is connected to the drain pum...
This water-level pressure switch in your wash monitors and regulates the water levels throughout the fill, wash, and rinse cycles. You will usually find it inside the control panel or near the tub. It...
This inlet valve assembly in your washer controls the flow of hot and cold water into the machine, opening and closing as needed during the wash cycle to ensure the drum fills with water at the correc...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
July 5, 2023
The washing machine does NOT POWER up when the power button is touched.
For model number WT7305CW
Hello Bill, thank you for reaching out. You may need to check the display and main control board, part number PS16223695, to fix the issue. It processes the cycle settings you choose. The interface also houses the display for the washer. We hope this helps, good luck with this repair!
Hi I have WT7150CW with Impeller. Is it possible to change IMPELLER WITH Agitator of WT7305CW. If yes give me the nos of parts to replace and price as well. THANKS
For model number WT7305CW
Hello Kamal, thank you for the great question. The agitator for model number WT7305CW does not fit the model number WT7150CW. It is not possible to interchange parts between the two different models. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
NEAL
March 28, 2024
Once in a while I get little brown flakes that seem to be grease or something that are left on clothing after wash. I do a tub clean and it seems to create more of them. Any advise?
For model number WT7305CW
Hi Neal, thank you for reaching out. Based on our research, the issue is most probably with the drain pump, part number PS12748410. You may need to replace it to fix the issue. We hope this solves your problem!
The power button no longer functions. What part would I order to remedy this situation?
For model number WT7305CW
Hi John, thank you for contacting us. We believe your washer is having this problem because of the faulty display and main control board assembly, part number PS16223695. We would suggest replacing it to fix the issue. Glad to be of assistance!
E 6 fault code it says to replace the clutch assembly
For model number WT7305CW
Hi Bill, thank you for reaching out to PartSelect. If your model is displaying an E6 error code, this indicates an error with the clutch housing assembly. An E6 error can also occur when a coin or foreign object is stuck between the pulsator and the tub. If any item is stuck, you may need to remove that to fix the issue. If this is not the case, then you may need to replace the clutch housing assembly, part number PS16222849. Let us know if you have further questions!
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new
... Read more leg was a breeze.
The old dispenser is removed by slightly raising the front as you pull it out of the housing slot. To install the new dispenser, keep the front slightly tilted up and insert the new dispenser into the housing alot
