Models > WSKS3040F0WW

WSKS3040F0WW General Electric Washer - Overview

Get Parts and Repair Help for WSKS3040F0WW

If you know the washer repair part you need, you can browse the list of all parts on the WSKS3040F0WW, or you can search by name or part description. You can also find your part by where it is located on the WSKS3040F0WW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. We’ve also included any installation videos we have for WSKS3040F0WW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.20

Check Valve Flapper

This part allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

$16.23

Faucet Adaptor and Washer

Used with portable dishwashers.

$6.84

STRAP SNUBBER

$8.75

SEAL

$33.11

HOSE DRAIN 4 FT

$70.48

PULLY DRIVE

$43.14

FILTER

$202.23

CAPACITOR

$36.09

HINGE LID (RH)

$32.04

SLIDER SPLUTCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

dishwasher check valve

  • Customer: ted from columbia SC
  • Difficulty: Very Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 4 people found this instruction helpful
No Plumer could help me. No one heard of a dishwasher check valve. My dishwasher was an ISA. I was lost until i found the relationship to Kitchenaid. Then sears. Vuela!
The valve was there, but unavailable.
A few more links, and the term "flapper" came up.
Well, my dishwasher check valve HAD a flapper inside. Although a plastic pos, i could ... read more

wouldn't drain

  • Customer: JOHN D. from GOSHEN IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 2 of 6 people found this instruction helpful
Removed the dishwasher to get at the defective parts and removed,than replaced the two check valves and reassemble. read more

Standing Water in Dishwasher

  • Customer: Robert Kline from Mechanicsburg PA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
My dishwasher being 12 years old had accumulated a fair amount of debris/muck in the sump area located near the back beneath a plastic cage. I removed the cage and cleaned out the sump area. That solved the standing water issue for about two months and then it returned but this time the water depth was about 4 inches compared to an inch. I then changed ou... read more