Models > WRTG18X6AQ1 > Instructions

WRTG18X6AQ1 Westinghouse Refrigerator - Instructions

All Instructions for the WRTG18X6AQ1
211 - 225 of 286
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
support rail broke when overstuffed meat drawer forced closed
Disassembled shelf and drawer to find broken rail. Found parts number on website's "exploded" parts view. Reassembled with new part and drove one screw to secure. FORTUNATELY I kept old broken part which had special screw needed to reassemble. I would have expected replacement part to include its attachment screw, but it did not.
Parts Used:
Drawer Support Rail - Left Side
  • Kenneth from Corpus Christi, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drawer support broke
After removing the drawer from refrigerator I fixed it on the kitchen counter in less than 15 minutes.
Parts Used:
Drawer Support Rail - Right Side
  • Lowry from Lafayette, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broke The Draw Slide Stop Off The End Of Lft Hand Rail
Took all the item off the shelf turned it upside down on the table,worked rear off off the pin carefully,install new rail and refastened the front tab strip.
Parts Used:
Drawer Support Rail - Right Side Drawer Support Rail - Left Side
  • lloyd from COCHECTON, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
my parents pushed down to hard on the meat drawer and snapped the support glides off.
My sisters and mother were going to call the repairman. I looked at it and thought I could easily repair it. I ordered the part. Just like all the reviews said it took longer to clear off the shelf and take it out of the fridge than it took to repair it. I figure only call for service when it is something you really cannot repair. Thanks!!!
Parts Used:
Drawer Support Rail - Right Side
  • joan from oak lawn, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Meat drawer, left slider arm broke
Took out the top shelf, unscrewed the slider, screwed in the new slider and that was it! Very easy and fast service.
Parts Used:
Drawer Support Rail - Right Side
  • Lisa from Fort Atkinson, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
2 retainer bars require cutting to size
Cut 2 retainer bars for the freezer
Parts Used:
Refrigerator Door Shelf Retainer Bar - Cut to Fit Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Patrick from Desoto, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
The freezer portion of the refrigerator worked but the fresh food refrigerator did not
I watched the step-by-step installation video and followed the instructions therein.
Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz
  • KIMBERLY from BROOKLYN, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Was missing a freezer shelf
Parts came in the mail, and the bar was a little too long, so I cut it with tin snips and it went right in. Easiest job I've ever done.
Parts Used:
Refrigerator Door Shelf Retainer Bar - Cut to Fit Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Todd from Minocqua, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The crisper pan cracked
I took the cracked pan out, waited for the new pan to arrive (2 days) and slid the new pan right in. It was so easy.
Parts Used:
Crisper Drawer
  • Margaret from Norman, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Original end cap had broken
Replaced end cap. Very easy fix. Only took a couple of minutes.
Parts Used:
Door Shelf Retainer Bar End Cap - Right Side
  • Maureen from Anchorage, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced shelf retainer bar end
I used a screwdriver to open up the slot to be able to press out broken piece of old Bar end and slipped in new part and crimped bar down tight again no problem at all simple job
Parts Used:
Door Shelf Retainer Bar End Cap - Right Side Door Shelf Retainer Bar End Cap - Left Side
  • Duane from Anaheim, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
left rail holding inside drawer broke
removed old broken rail - installed new rail held in place by a screw . the biggest job was removing food items from top shelf unit, sliding out top shelf unit that rail was mounted on. the rail mount was held by a screw on the back side.
Parts Used:
Drawer Support Rail - Left Side
  • John from Coffeen, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
freezer would not freeze longer than one day. after ten years without problem
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Parts Used:
Run Capacitor
  • ronald from deering, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Drawer Support Rail Left Side Broken
The Hardest Part Was Taking Everything Off The Shelf,Took Old Part Off And New Part Popped In And I Tightened The Screw And That's It Done!Thanks PartSelect!
Parts Used:
Drawer Support Rail - Left Side
  • Dorphial from Arcadia, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
light socket burned out
snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.
Parts Used:
Light Socket
  • Judith from Gambier, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRTG18X6AQ1
211 - 225 of 286
Back to Top