Models > WRT8G3EWK

WRT8G3EWK Westinghouse Refrigerator - Overview

Get Parts and Repair Help for WRT8G3EWK

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRT8G3EWK, or you can search by name or part description. You can also find your part by where it is located on the WRT8G3EWK by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRT8G3EWK parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$22.80

Door Shelf Retainer Bar

$25.07

Door Shelf Retainer Bar

Sold individually.

$24.23

Drawer Support Rail - Right Side

This drawer track supports the right hand side of the sliding drawer.

$21.75

Door Handle

This white handle can be used with both the freezer door and the fresh food door of many refrigerators. Note: As per manufacture this handle includes the mounting block and screw for the top of the handle, If you need the screw for the bottom it must be ordered separate

$46.29

Crisper Glass Shelf Insert

Glass only.

$56.46

Fresh Food Door Gasket

This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air outside.

$19.73

Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$24.23

Drawer Support Rail - Left Side

This drawer rail supports the left hand side of the sliding drawer.

$14.79

Defrost Thermostat

The thermostat senses that the heat near the cooling coils has reached the desired temperature.

$5.14

Screw

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Refrigerator door gasket torn

  • Customer: Matthew from Washington DC
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 89 of 93 people found this instruction helpful
No instructions included, so it took a little bit of staring at the new part to figure out how it works. The barbed ridge on the gasket fits into a slot on the door. The flat face of the gasket has an internal magnetic strip that helps keep the seal tight against the steel face of the refrigerator. Installation requires no tools. This is the basic process:read more

evaporator coil kept freezing up, refridgerator warm.

  • Customer: Greg from Hanover Township PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 87 of 97 people found this instruction helpful
This was the second part I tried. The defrost timer was first, but that did not fix it. To do this I had to remove the ice maker and the back plate of the freezer. Then I defrosted the coil and cut the wires. stripped them back and installed the new thermostat. re-assembled and tested. has been working great ever since. read more

Door handle broke off

  • Customer: Lisa from Linton ND
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 63 of 69 people found this instruction helpful
First I removed the top screws, then I slide it off the lower screw that is hidden behind the handle. I replaced the handle by sliding it onto the bottem first then attaching it onto the top with the two top screws. read more