This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor ...
This is a meat drawer shelf frame for some models of refrigerator. This white plastic frame measures approximately 12-inches wide and 16 inches long, and is used to allow the meat drawer to easily sli...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This door shelf bin is a genuine OEM replacement part that is designed for refrigerators. It is made of clear plastic and fits on to mounting brackets on the the interior of the door. The door shelf b...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
November 16, 2023
Our refridgerator is freezing our food. It was first only happening at the bottom of the refrigerator, now it's happening all over.
I adjusted the thermostat over two weeks ago the lowest setting (all they way to the left) and nothing has changed, food is still freezing
For model number WRT311FZDT01
Hello Fred, thank you for getting in touch. You may need to check the evaporator fan motor and the evaporator air diverter. If they are not faulty, then replace the control board, part number PS11773223, to fix the issue. Glad to be of assistance!
My unit has a MFG DATE 202105.
It has a sliding deli door bracket that broke. I need the bracket only but can’t find a part number.
For model number WRT311FZDT01
Hello Mark, thank you for getting in touch. The part you are looking for is the shelf, part number PS11731608. Customer service is available 7 days a week if you need help placing an order!
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck le
... Read moret's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then remov
... Read moreed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.