WRT21MP5AQ4 Westinghouse Refrigerator - Instructions

jump thermostat,fan and compressor came on, ordered thermo from this excllent parts supplier, part came in 4 days later, it was exact replacement, works exactly right!

just put the new one in place

Just followed the online instruction video .It was very easy.

The shelf arms fit perfectly --I just popped them into place.

removed top shelf from refrigerator,put new rail in slots and tightened screw.Replaced shelf and slid in drawer.

You guys at Partselect are the best!!! Went to your site, typed in my appliance symptoms, and received possible fixes. Ordered the suggested parts (under $50) on a Sunday night and got em Tuesday am. Installed the easiest one first and Voila!!!! Frig is working great. Thanks Bob S

I just snapped the new ones in place. I am a very satisfied cutomer. I ordered the parts on Thursday afternoon and they came on Saturday. Excellent service. Thank you!!! Highly recommanded.

First removed drawer, then shelf. Unscrewed the broken support rail. Attached the new one and screwed it on. Replaced the shelf, slide in the drawer, that's it. Less than 10 minutes.

Checked defrost timer. It was a shocker: it was completely burnt out. Replaced it with the new part very easily. I thought now it would defrost properly but unfortunately the thermostat also was shot. I had ordered it along with the timer just in case. It was not expensive at all and I saved time but having it with me when I replaced the timer. NOW ALL IS WELL AND REFRIGERATOR SECTION COLLING PROPERLY. THANKS TO VIDEO AND PARTSELECT.

Using your online troubleshooter, it was probably the defrost timer and/or the defrost thermostat. Both cheap so I ordered both. The online repair videos showed how to replace those parts. Replaced the timer first with no problems. Removed the panel at the freezer back an saw a streak of black smoke on the white panel wall above the thermostat. Good chance this was the failure point. Video also showed how to replace this unit without any problem. Set the temperature control and let the frig run over night. Problem solved!frig at 38d and freezer at 0d.

supper easy

unsnap the old broken parts and snap in the new one.The easiest repair I've ever made.

Remove 4 screws that hold up overhead controls, this is also the part that holds the light. Unplug the timer and replace. Super simple and runs great now. After you plug it in it may take a few minutes to kick on the compressor but it will. Also I was pleased it was a factory Frigidare part. Price was right.

My husband pulled off the broken piece, then snapped the new one into place. Super easy, quick, and saved us money.

One retainer bar was gone. I slid the other one that had cracked out and just slid the new ones in. Took no time at all. The crisper drawer, I just took out the old cracked drawer and slid the new one in. It is clear, where the old was manilla, but now I can see the fruits!! The only thing I wish is that the manufacturer had put a post in the center of the retainer bars so they would not crack. Also they stick out, so they allow smaller items to slip out. Again, manufacturer problem. Over all I am very happy to have found this company!! I did have to go to the website a few times as the last # on my appliance could not be read and I was not sure I was ordering the right parts, but I could have called. :)