WRT18G4AW0 Westinghouse Refrigerator - Instructions

Ordered part attached part to bar and installed on door.

I just unscrew the broken support rail and replace it with the new one. I didn't need the left side rail but also replace it. It was very easy to do it. The new parts I order came on time, no problem at all. Thanks for you reliable internet services. E. Lopez

Ordered the new part-Unplugged the refrigerator - took off the cover over the defective timer - put in the new part put the cover back on - plugged the refrigerator back in - so far, so good!~

I watched the videos (they really help) and followed the steps. Everything went smooth with no surprises

Used Philips head screwdriver to remove screw at rear edge of drawer rail, slide new rail on, drove screw back into rail- took longer to move food off and back on shelf than to do repair

remove two screws, turn old handle 15 degrees, pull off old handle.Insert new handle onto bottom screw, turn back 15 degrees. insert and tighten two top screws and its done. This took less than 15 seconds to replace.

Just followed the online instruction video .It was very easy.

So very easy. I couldn't believe how quickly the part arrived and how easy it was to install.

removed top shelf from refrigerator,put new rail in slots and tightened screw.Replaced shelf and slid in drawer.

You guys at Partselect are the best!!! Went to your site, typed in my appliance symptoms, and received possible fixes. Ordered the suggested parts (under $50) on a Sunday night and got em Tuesday am. Installed the easiest one first and Voila!!!! Frig is working great. Thanks Bob S

took off top screws I slid the bottom of handle on an angle then turned handel to the top of the door and replacedthr screws all done

The screw that held the bottom of the handle had pulled out of the metal fridge door. I decided to replace everything in the assembly. The replacement parts were perfect and the job was so simple that the replacement only required five minutes. I removed the original parts and replaced them with the parts that I had ordered from PartsSelect. What made me feel more confident with the activity was that the PartSelect on-line appliance catalogs had good diagrams and good part number cross-references. It was a slick process.

First removed drawer, then shelf. Unscrewed the broken support rail. Attached the new one and screwed it on. Replaced the shelf, slide in the drawer, that's it. Less than 10 minutes.

Checked defrost timer. It was a shocker: it was completely burnt out. Replaced it with the new part very easily. I thought now it would defrost properly but unfortunately the thermostat also was shot. I had ordered it along with the timer just in case. It was not expensive at all and I saved time but having it with me when I replaced the timer. NOW ALL IS WELL AND REFRIGERATOR SECTION COLLING PROPERLY. THANKS TO VIDEO AND PARTSELECT.

Using your online troubleshooter, it was probably the defrost timer and/or the defrost thermostat. Both cheap so I ordered both. The online repair videos showed how to replace those parts. Replaced the timer first with no problems. Removed the panel at the freezer back an saw a streak of black smoke on the white panel wall above the thermostat. Good chance this was the failure point. Video also showed how to replace this unit without any problem. Set the temperature control and let the frig run over night. Problem solved!frig at 38d and freezer at 0d.