Models > WRT18CVAD1

WRT18CVAD1 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for WRT18CVAD1

If you know the refrigerator repair part you need, you can browse the list of all parts on the WRT18CVAD1, or you can search by name or part description. You can also find your part by where it is located on the WRT18CVAD1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for WRT18CVAD1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$12.91

Defrost Thermostat

This limiter thermostat cuts out when the temperature inside your refrigerator reaches 55 degrees Fahrenheit and kicks back in when the internal temperature drops to 20 degrees Fah...

$2.92

Crisper Drawer Cover Support

$23.91

Evaporator Fan Blade

$5.20

Hexagonal Screw

$5.52

Hex Head Screw

$2.40

Ice Cube Tray

Sold individually.

$7.52

Door Hinge Pin Bearing

This white hinge pin bearing pivots the freezer and refrigerator door.

$80.98

Door Gasket

This almond door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$28.71

Defrost Drain Pan Kit

This kit includes the drain pan, thermal mastic, sound dampening pad and 2 retainer wires. This part mounts to the top of the compressor.

$7.36

SWITCH-LIGHT/LAMP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

door seals cracking from age on both compartments

  • Customer: Clark from Wenatchee WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 14 of 16 people found this instruction helpful
Located the many screws which hold the inside surface of the door on. The screws are located between the seal and the inside surface; you have to hold back the seal to find the screws.

The seals are attached to this inner surface by a snug fit, and clamped in place when the screws are tightened again. Its simpler than it sounds.

Final... read more

freezer kept icing over, refrigerator too hot

  • Customer: debra from new washington OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 10 of 12 people found this instruction helpful
First, I unplugged the appliance. Safety, first.
Than I removed the shield which was held in by screws. This covered the fan, thermometer.
The defrost thermostat was taken out, with a little extra force. The wires on the defective part were no longer attached to the part. The instructions were easy to follow in replacing the defrost thermostat. I... read more

Coils freezing up and refrigerator would get warm

  • Customer: Richard from Scranton KS
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 6 of 7 people found this instruction helpful
Wasn't sure if it was the derost timer or the heating element. Since the timer was much cheaper, I bought it and crossed my fingers.
My story is like the others. Unplug the refrigerator, snip the old wires, strip back the wire insulation, use the supplied connectors to attach the new defrost timer to the existing wiring.
Success! My coils no lon... read more