WRS6R3EWA Crosley Refrigerator - Instructions

Removed tray by pulling out. Took out three screws at bottom. Lifted up on face plate. Remove three screws at top,pulled out to access actuator,relieved spring. Then took out screw on the right,loosened two screws on the left and removed broken part. Put in new part and reassembled.

The 2 door bins came in 3 days! I could not believe how fast the service was. The door bins just slid right into place, not tools required. They look great. Special shout-out to Jennifer T. who helped me over the phone. I placed the order for the bottom door bin and later realized that I could add one more door bin to the refrigerator door to make more storage area. I called the customer service number and she canceled my order. She sent me a follow up email and I was able to place a new order to get both door bins and save on shipping fee. PartSelect was great! Thank you!

parts fit perfectly

I was worried that the support was a permanent fixture in the refrigerator wall. But I pried it out and replaced it with the new part. Holes were exactly the same size so the new part easily replaced the old one.

Purchase was easy. Delivery was quick. Install videos was accurate. Made it eady to as DI project. Safe place for purchase and support. Saved on cost of professional visit.

It took about 5 minutes to pull the old seal out and replace with the new one. Simple enough for a 71 year old woman to do alone.

We watched your video online and just followed the instructions. It was super easy to follow and install the new parts. We would highly recommend your site to anyone. The parts came in the mail in 3 days. Thank you very much for saving us to call a repair person and saving us about $100.

Since the evaporator was all iced up, I decided to replace the least costliest item (defrost thermostat kit); did not resolve the problem. Once I replaced the freezer temperature control thermostat, the freezer temperature stabilized right at 0 degrees fahrenheit with dial on factory setting. Compressor no longer running constantly.

Initially I changed the filter, but in so doing, I misplaced the o ring located in the filter cup; without that o ring water leaks out every time it cycles. I purchased the o ring online (five dollars plus eight dollars to ship) and bingo no more leaks.

The part number was easy to find on the diagram. Delivery was as promised. Instructional film was very helpful and reassuring. Only problem was that the broken part left in the door was difficult to remove as it was distorted and would not slide out. Took considerable persuasion by screwdriver and pliers to remove remaining portion. New part went right in and reassembly was easy. Door works fine now.

removed backing to refrig unscrewed 2 screws from bracket pulled unit out unhooked hoses and elec plug's / putting in new just reversed the instalation

Remove crisper and shelf. Use a small punch and hammer to gently push the tightening pin through to the wall of refrigerator, keep in mind you'll need to remove this piece with small needle nose pliers before installing new part. Set new part in place and lightly tap the pin in until flush. Install crisper and enjoy the rest of your day.

Remove cover, puch old pin into hole. Remove old support. Set new support in & drive pin in flush. Replace cover.

My part had threaded fittings. The part that I received had snap fittings. Once I realized that that snap fittings worked with the bare tubing and not any special tip endings, I simply cut off the ends of my tubing that mated with the threaded fittings. I then had bare tubing that snapped into the snap fittings. Two minutes later, the part was in place and the job was done. Problem solved.

Instructions made the job very easy. Parts were an exact replacement. Thank you