WRS6R3EW8 Westinghouse Refrigerator - Instructions

The shelf was here day after I ordered and popped in in seconds

it was a simple fix, all i had to do was remove 3 small bolts from top of door, set door aside remove 1 screw that holds door cam in place, install new door cam.hole job took about 15 minute's.

Couldn't have been an easier. Removed the screw/nuts from the top of the fridge door that held the door in place and removed the door. Unscrewed the holder at the bottom, replaced both parts and put the door back together. It took me longer to get everything out of the fridge door than to replace the parts. EASY AS COULD BE!!!

Snapped the new bottom shelf into the door. I almost ordered the incorrect shelf - the first shelf i found was clear. I had to do some more searching to find a white one.

I googled my moduel number and partselect.com came up. I recieved my part in three days and put it in. Surprised that it was so easy.

just slid it onto the door

Easy to replace

Took the door off,as per instructions,pulled the worn bottom bearing out, pushed new in and replaced door. The job was very simple and took about ten minutes. Also I received the part in two days after ording

Due to the nature of the support deisign and installation which was unusual I watched the video on how to extract the old broken support and install the new one, odering the new part was simple as the view privided in the parts section was specific and and easy choice to make, cost was very minimal and I received it the next day due to my being in close proximity to the shipping point, thank you and my crisper is very happy and so am I.

I removed the door and replaced the broken hinge bearing with the new part and the door works great!

took door off ,replaced the hinge,and put door back on....

After taking door off, I found the door closure/hinge bearing was broke. I got manual out, looked up part number, googled it, and ordered the part from this website. Couldn't be happier!! My wife is really happy too, such an easy fix

Just as the instructions showed. opened the refrigerator, removed the water filter cover. removed the old filter and installed the new one. Very easy to do.

I checked on line, found the parts house and with the help of the shown diagrams/pics of the parts I was able to order the right part. It arrived the next business day and I just snapped it into place.

I replaced the entire dispenser. I decided it would probably be cheaper in the long run than replacing parts, thus lasting much longer. One thing I would like to comment regarding Part Select is that in all my years of ordering I have never recieved delivery any faster. I ordered one morning and part was delivered the next.